King Air Stretcher Divan, 4 Place, LH
Part Number: 32-0355
Increase the utility and functionality of your King Air with an AvFab’s STC approved 4 place Divan/Stretcher that allows you the option of carrying either passengers or a patient on the same divan. This conversion can easily be done with the divan/stretcher still in the aircraft. Ideal for disaster relief efforts. The Divan/Stretcher is approved for occupancy during all phases of flight (including take off and landing).
AvFab Signature Quality
- King Air: 90, 99, 100, 200, 300, 350
Very quickly and easily converted between passenger carrying and for patient transportation. You can carry passengers on one leg of a flight and then convert it for an ambulatory person on the next leg. FAA approved for either use. 72
Underseat storage drawers. Shoulder harness kit (required for this installation).
Airplanes manufactured in 1992 or after must have factory installed arm ledge (“console”) removed from sidewall in order for this Divan to be installed. Otherwise, arm ledge will interfere with Divan installation. No other airframe modification is required to install the divan other than removing existing seat/s and furnishings, and locating the new divan in the desired location (complete installation instructions, diagrams, and weight and balance data are included in the kit). AvFab shoulder harness restraint system, part number 32-0181K, is required to install these divans. See shoulder harness data sheet for installation instructions. The divans can be installed on either side of the airplane in a range of stations.
Federal Aviation Administration PMA and STC eliminating the need for field approval.
Divans are typically shipped within 3 weeks after receipt of order.
Existing cabin seats and or furnishings removed for installation of the stretcher may have a substantial trade-in value (based on aircraft model and year of manufacture, condition, completeness, etc.) Please call for quote.