Top Access ISR (Intelligence-Surveillance-Reconnaissance) Special Missions Operator Seat
Part Number: 32-0493
AvFab’s new STC approved “Top Access” King Air and Beechjet/T1A Operator Seat allows for seat installation and removal directly above the seat track. This saves many man-hours over other designs that require their seat to slide in from the end of the seat track.
A proven design that is well-suited for the demanding requirements of any Special Missions ISR theater.
Maximum operator comfort is ensured from design features that include vertical seat adjustment of 3”, 5-point restraint system, fore-aft floor tracking controlled via a convenient hand lever and optional stowable arm rests.
AvFab’s latest King Air/Beechjet Operator Seat is easily installed into the seat track from above allowing equipment racks and other seats to remain in place. Once installed, the seat can be tracked forward and aft in the track. Non-King Air/Beechjet installations can be accomplished by utilizing a mounting pallet that couples the seat to existing seat track.
Due to variable seat upholstery weights it is the responsibility of the installer to determine the exact final seat weight when installing and removing the operator seat. For reference, the typical frame assembly and sub part weights are listed as follows:
Seat frame assembly w/ 2 arms = 27.5 lbs.
Seat frame assembly w/ 1 arm = 26.5 lbs.
Seat frame assembly w/ No arms = 25.5 lbs.
Restraint System = 2.5 lbs.
Maximum Allowable Seat Weight = 40.0 lbs.
with Cushions & Upholstery
AvFab Signature Quality
- : ,
- King Air: 90, C90, C90A, C90B, C90GT, C90GTx, E90, F90, H90, 99, 100, 100A, 100B, B100, 200, 200CT, B200, B200GT, 250, 300, B300, 350, 350i, 360
AvFab’s robust ISR Operator seat features a top access design for Beechcraft King Air series Special Missions aircraft allowing the seat to be installed/removed without clearing the entire seat track. Operator can easily adjust height and floor tracking. High comfort foam is provided. Folding armrests are standard.
Folding/Stowable Armrests (left & right), Leather Upholstery, Sheepskin Seating Surfaces
Seat is designed for installation onto the seat track through top of track access. Once installed, the seat can be tracked forward and aft in the track. Non-King Air installations can be accomplished by utilizing a mounting pallet that couples the seat to existing seat track. Forward facing only. Can be installed on left or right side of aircraft. Cannot block emergency exits.
FAA STC and PMA eliminating the need for field approval.
- FAA STC SA01809WI
- EASA 10066088
Seats are typically shipped within 3 weeks after receipt of order. Shipping weight and dimensions are 75 lbs., 42×30×30.